Lockheed YP-24

1931

Back to the Virtual Aircraft Museum
  FIGHTERVirtual Aircraft Museum / USA / Lockheed  

Lockheed YP-24

The sole YP-24, delivered to the Army on 29 September 1931, was the first fighter designed by the Lockheed firm at Burbank, California, founded by Allan Lockheed (originally Loughead) and renowned for its Vega and Orion monoplane airliners. Initially designated XP-900, the YP-24 was a low-wing monoplane two-seater with retractable landing gear seen as a heavier and faster replacement for the Berliner-Joyce P-16, which had equipped the 94th Pursuit Squadron at Selfridge Field, Michigan. The ever-familiar Curtiss Conqueror was again employed as powerplant. Although of composite wood and metal construction, the Lockheed P-24 in a production version would almost certainly have been an all-metal machine. Though it carried 'extra' weight in the person of a rear gunner and his weapon, the YP-24 with its top speed of 344km/h was the fastest fighter in the United States in 1931. The YP-24 was also uncommonly big for a fighter, with a wing span of 13.03m and a maximum take-off weight of 1978kg.

The Burbank design team under engineer Robert Wood had created an exceptionally promising heavy aircraft with potential as a pursuit ship and even more promise for the attack role. It was to be company finances, not the merits of the design, which doomed the YP-24 to 'one-off' status. In March 1929, the Lockheed firm had been acquired by Detroit Aircraft Corporation, seeking to build what would today be called a conglomerate. In October 1932, at the lowest point in the Depression, the Detroit firm filed for bankruptcy. That same year, the Lockheed firm would separate from both its founder and its parent company, and would be rescued and re-organized by a new chief executive, Robert Gross. But by then it was too late for the YP-24. The Army ordered five YlP-24s and five further airframes to be built as YA-9 attack bombers, but none was ever completed.

During a test flight on 19 October 1931, the YP-24 experienced a mechanical problem with its landing gear partially lowered. The landing gear could not be made to lower fully and lock into place. The pilot was able to retract the gear and was contemplating a belly landing, but onwatchers were concerned that the low-slung engine radiator would dig in, flipping the heavy aircraft on its back. The pilot was ordered to parachute to safety and the YP-24 was lost.

Specification 
 WEIGHTS
  Take-off weight1978 kg4361 lb
  Empty weight1365 kg3009 lb
 DIMENSIONS
  Wingspan13.03 m43 ft 9 in
  Length8.76 m29 ft 9 in
  Height2.49 m8 ft 2 in
  Wing area27.13 m2292.02 sq ft
 PERFORMANCE
  Max. speed344 km/h214 mph
  Cruise speed290 km/h180 mph
  Ceiling8047 m26400 ft
  Range895 km556 miles
 ARMAMENT1 x 12.7mm, 1 x 7.62mm fixed machine-guns, 1 x 7.62mm in the rear

Comments
James, e-mail, 21.10.2011 20:41

It was a Curtiss V-1570-23 "Conqueror" liquid-cooled V12 engine, that developed 602 hp & had a 3-blade propeller. It had a top speed of 215 mph.

reply

Klaatu, e-mail, 21.05.2011 23:01

"What engine was in this aircraft? It appears to be an inline."

The engine was the Curtiss Conqueror, an engine used on many U.S. Army aircraft of that time. This fighter, along with it's Consolidated-built version, was developed during a brief period when the Air Corps was experimenting with the concept of the single-engine, two-seat fighter. The idea proved to be a developmental dead end.

reply

Chad, e-mail, 02.03.2010 01:06

What engine was in this aircraft? It appears to be an inline.

reply

Do you have any comments?

Name    E-mail


COMPANY
PROFILE


All the World's Rotorcraft


All rhe World's Rotorcraft AVIATION TOP 100 - www.avitop.com Avitop.com