Vickers Vanguard

1959

Back to the Virtual Aircraft Museum
  PASSENGERVirtual Aircraft Museum / United Kingdom / Vickers  

Vickers Vanguard

The very considerable success of the Vickers Viscount in airline service was due to the smoothness, economy and reliability of its turbine engines. In one enormous leap it had raised cruising speed almost 100% by comparison with the piston-engined Vickers Viking; it carried two or three times as many passengers (according to type) and offered increased range. In early 1953, not long after the Viscount entered service with British European Airways (BEA), discussions began to initiate the design of a successor. Both BEA and Trans-Canada Airlines were interested in a generally similar aircraft; compromise in design to satisfy the views of these two operators resulted in the low-wing configuration and 'double-bubble' fuselage to provide a large underfloor cargo hold beneath the main cabin.

The power plant considered originally for inclusion in the design was the Rolls-Royce Dart. But Rolls-Royce intimated that development of a new engine, the RB.109, was then well under way and it (later known as the Tyne) was chosen to power this new transport. Construction was entirely conventional except for the wing, which introduced integrally machined skins of light alloy to provide spanwise stiffening at low cost, and three shear webs instead of the single spar in the Viscount wing. When tied together by closely spaced ribs it produced a rigid box structure and outboard of the centre-section it was sealed to form integral fuel tanks.

First flight of the prototype Vanguard, as the new aircraft had been named, was made on 20 January 1959. But because of the normal development programme of a new civil airliner - coupled with delays caused by problems with the new power plant - it was not until 1 February 1961 and 1 March 1961 that these aircraft began regular service with Trans-Canada Airlines and BEA respectively. By then this and other second-generation turboprop-powered airliners had been deposed by the development and introduction into service of economical turbojet-powered airliners such as the Boeing Model 707. Consequently production ended after the original orders had been completed: 20 for BEA and 23 for Trans-Canada Airlines.

On 10 October 1969 the first of nine freighter conversions of the Vanguard, called Merchantman, was flown for BEA.

3-View 
Vickers VanguardA three-view drawing (900 x 612)

Specification 
 MODELType 952 "Vanguard"
 CREW2-3
 PASSENGERS97-139
 ENGINE4 x Rolls-Royce Tyne RTy.11 Mk 512 turbo-prop, 4135kW
 WEIGHTS
  Take-off weight63977 kg141046 lb
  Empty weight37421 kg82500 lb
 DIMENSIONS
  Wingspan36.14 m119 ft 7 in
  Length37.45 m123 ft 10 in
  Height10.64 m35 ft 11 in
  Wing area141.86 m21526.97 sq ft
 PERFORMANCE
  Cruise speed684 km/h425 mph
  Ceiling9145 m30000 ft
  Range w/max payload2945 km1830 miles

Comments1-20 21-40 41-60
kent peyton, e-mail, 27.09.2007 16:41

Interesting I flew on it several times my first flight
with air canada.Nice workhorse airplane .I remember a lot of things in the cabin vibrated from the powerful rolls royce tyne engines.Nice and comfie and large oval windows gave a great view.I thought the integral airstairs were
very cool.The engines had a very distinctive sound.

reply

w f wendt, e-mail, 21.09.2007 19:40

Is it time to bring back the turboprop?

It was understood a half cago that the turboprop was almost as fast as a jet, but consumed much less fuel and landed much more slowly.

The difference between 400 mph and 600 mph is significant on transoceanic flights, but on less than 1000 mi?

Especially when the turboprop can get into much smaller, much closer ariports, such as a restored Chicago Meigs?

See Airpower 2003 article on the Lockheed Electra, which has a caption on the Vanguard cruising at 450 mph.

reply

1-20 21-40 41-60

Do you have any comments?

Name    E-mail


COMPANY
PROFILE


All the World's Rotorcraft


All rhe World's Rotorcraft AVIATION TOP 100 - www.avitop.com Avitop.com